LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2019 >> Altima Edition ONE >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (Engine Control System (DTC/Circuit Diagnosis) (Pr25DD) (2 Of 4)) >> DTC/Circuit Diagnosis >> DTC P0500: VSS >> DTC Diagnosis Procedure >> PR25DD engine

PR25DD engine

WARNING: This page is about a different variant/trim than selected.
  1. CHECK DTC PRIORITY 

    If DTC P0500 is displayed with DTC UXXXX or P0607, first perform the trouble diagnosis for DTC UXXXX or P0607.

    Is applicable DTC detected?

    YES

    Perform diagnosis of applicable. Refer to DTC Index .

    NO

    GO TO 2.

  2. CHECK DTC WITH TCM 

    Check DTC with TCM. Refer to DTC Index .

    Is the inspection result normal?

    YES

    GO TO 3.

    NO

    Perform trouble shooting relevant to DTC indicated.

  3. CHECK DTC WITH ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT) 

    Check DTC with ABS actuator and electric unit (control unit). Refer to DTC Index .

    Is the inspection result normal?

    YES

    GO TO 4.

    NO

    Perform trouble shooting relevant to DTC indicated.

  4. CHECK DTC WITH COMBINATION METER 

    Check DTC with combination meter. Refer to DTC Index .

    Is the inspection result normal?

    YES

    GO TO 5.

    NO

    Perform trouble shooting relevant to DTC indicated.

  5. CHECK INPUT SPEED SENSOR 

    Check input speed sensor. DTC Diagnosis Procedure

    Is the inspection result normal?

    YES

    GO TO 6.

    NO

    Replace or replace error-detected parts.

  6. CHECK WHEEL SENSOR 

    Check wheel sensor. Refer to DTC Diagnosis Procedure .

    Is the inspection result normal?

    YES

    Check intermittent incident. Refer to Inspection .

    NO

    Replace or replace error-detected parts.