LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2019 >> Altima Edition ONE >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (Engine Control System (DTC/Circuit Diagnosis) (Pr25DD) (2 Of 4)) >> DTC/Circuit Diagnosis >> DTC P0340: CMP Sensor >> DTC Description >> PR25DD engine >> DTC Detection Logic

DTC Detection Logic

WARNING: This page is about a different variant/trim than selected.

DTC

CONSULT screen terms

(Trouble diagnosis content)

DTC detection condition

P0340

00

CMP SEN/CIRC-B1

(Camshaft position sensor "A" circuit bank 1 or single sensor)

Diagnosis condition

Engine: Cranking or running (more than idle speed)

Signal (terminal)

Intake camshaft position sensor signal

Threshold
  • The cylinder No. signal is not sent to ECM for the first few seconds during engine cranking
  • The cylinder No. signal is not sent to ECM during engine running
  • The cylinder No. signal is not in the normal pattern during engine running

Diagnosis delay time

--
scientia non olet · About LEMON Manuals