LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2019 >> Altima Edition ONE >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (Engine Control System (DTC/Circuit Diagnosis) (Pr25DD) (2 Of 4)) >> DTC/Circuit Diagnosis >> DTC P026B: Injection Timing >> DTC Description >> PR25DD engine >> DTC Confirmation Procedure

DTC Confirmation Procedure

WARNING: This page is about a different variant/trim than selected.
  1. PERFORM DTC CONFIRMATION PROCEDURE 
    1. Start engine and drive the vehicle as per the similar conditions to Freeze Frame Data for 5 seconds. Refer to the table below.
    2. Hold the accelerator pedal as steady as possible.
      CAUTION: Always drive vehicle in safe manner according to traffic conditions and obey all traffic laws when driving.
      • COOLANT TEMP
      • ENGINE SPEED
      • CAL/LD VALUE

    Is DTC detected?

    YES

    Refer to DTC Diagnosis Procedure .

    NO

    To check malfunction symptom before repair: Refer to Intermittent Incident .

    NO

    Confirmation after repair: INSPECTION END

scientia non olet · About LEMON Manuals