DTC Detection Logic
WARNING: This page is about a different variant/trim than selected.
|
DTC |
CONSULT screen terms (Trouble diagnosis content) |
DTC detection condition |
||
|
P0127 |
00 |
IAT SENSOR-B1 (Intake air temperature too high) |
Diagnosis condition |
-- |
|
Signal (terminal) |
Intake air temperature sensor signal |
|||
|
Threshold |
When the amount of intake air is sufficient, the temperature sent from IAT is more than 90 deg. C (194 deg. F). |
|||
|
Diagnosis delay time |
-- |
|||