LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2019 >> Altima Edition ONE >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (Engine Control System (DTC/Circuit Diagnosis) (Pr25DD) (1 Of 4)) >> DTC/Circuit Diagnosis >> P0090 Fuel Rail Pressure Control System >> DTC Diagnosis Procedure >> PR25DD engine

PR25DD engine

WARNING: This page is about a different variant/trim than selected.
  1. CHECK DTC PRIORITY 

    If DTC P0090 is displayed with DTC P1197, first perform the trouble diagnosis for DTC P1197.

    Is DTC P1197 detected?

    YES

    Perform diagnosis for P1197. DTC Description

    NO

    GO TO 2.

  2. CHECK HIGH PRESSURE FUEL PUMP CIRCUIT 
    1. Turn ignition switch ON.
    2. Disconnect ECM harness connector and high pressure fuel pump harness connector.
    3. Check the continuity between ECM harness connector and high pressure fuel pump harness connector.

      ECM

      High pressure fuel pump

      Continuity

      Connector

      Terminal

      Connector

      Terminal

      F90

      67

      F108

      1

      Existed

      68

      2

    4. Also check harness for short to power and short to ground.

    Is inspection result normal?

    YES

    GO TO 3.

    NO

    Repair or replace the error-detected parts.

  3. CHECK HIGH PRESSURE FUEL PUMP 

    Check high pressure fuel pump. Refer to Component Inspection .

    Is inspection result normal?

    YES

    INSPECTION END

    NO

    Replace error-detected parts.