DTC Detection Logic
WARNING: This page is about a different variant/trim than selected.
|
DTC |
CONSULT screen terms (Trouble diagnosis content) |
DTC detection condition |
||
|
P0088 |
00 |
HIGH FUEL PRES (Fuel rail/system pressure - too high) |
Diagnosis condition |
Engine running at idle |
|
Signal (terminal) |
Fuel rail pressure signal |
|||
|
Threshold |
ECM detects that the difference between target fuel pressure and fuel rail pressure sensor signal is 2, 700 kPa (27.54 kg/cm 2 , 319.5 psi) |
|||
|
Diagnosis delay time |
5 seconds |
|||