LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2019 >> Altima Edition ONE >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (Engine Control System (DTC/Circuit Diagnosis) (Pr25DD) (1 Of 4)) >> DTC/Circuit Diagnosis >> P0016 Intake Valve Timing Control >> DTC Description >> PR25DD engine >> DTC Detection Logic

DTC Detection Logic

WARNING: This page is about a different variant/trim than selected.

DTC

CONSULT screen terms

(Trouble diagnosis content)

DTC detection condition

P0016

00

Crankshaft position B1 sensor A

(Crankshaft position - camshaft position correlation bank 1 sensor A)

Diagnosis condition
  • Ignition switch ON
  • Engine speed: 500 -2, 000 rpm [when vehicle speed is less than 4 km/h (2.5 MPH)]
  • Engine speed: 1, 200 -2, 000 rpm [when vehicle speed is 4 km/h (2.5 MPH) or more]
  • Engine coolant temperature: 60 - 120 deg. C (140 - 248 deg. F)
  • Battery voltage: 11 - 16 V

Signal (terminal)

--

Threshold

During the diagnosis of alignment of intake valve timing control, the angle difference between actual angle and target angle is 13 degrees or more.

Diagnosis delay time

0.4 seconds
scientia non olet · About LEMON Manuals