LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2019 >> Altima Edition ONE >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Automatic Transmission (Re0F10D) (DTC/Circuit Diagnosis)) >> DTC Diagnosis >> Transmission (TCM) >> DTC P187E: T/M System Malfunction >> DTC Diagnosis Procedure >> CVT: Re0F10D

CVT: Re0F10D

WARNING: This page is about a different variant/trim than selected.
  1. CHECK DTC PRIORITY 

    If DTC P187E is displayed with P0605, P062F, P0705, P0706, P0711, P0712, P0713, P0715, P0716, P0717, P0718, P0740, P0741, P0742, P0743, P0746, P0776, P0778, P0779, P0791, P0792, P0793, P0794, P0841, P0847, P0848, P084C, P084D, P0863, P0890, P0962, P0963, P0965, P0966, P0967, P2758, P2765, P2766, P2767, P2768, P2813, P2814, or P2815.

    Is applicable DTC detected?

    YES

    Perform diagnosis of applicable. Refer to DTC Index .

    NO

    GO TO 2.

  2. CHECK DTC DETECTION 

    SYMBOL With CONSULT

    1. Start the engine.
    2. Select "Data Monitor" in "TRANSMISSION".
    3. Select "T/M warning indicator DTC".
    4. Confirm that detected DTC.

    Is any DTC detected?

    YES

    Review the detected DTC in the past which was displayed in the "Data Monitor". Refer to DTC Index .

    NO

    INSPECTION END