LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2019 >> Altima Edition ONE >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Automatic Transmission (Re0F10D) (DTC/Circuit Diagnosis)) >> DTC Diagnosis >> Transmission (TCM) >> DTC P17F0: CVT Judder (T/M Inspection) >> DTC Description >> CVT: Re0F10D

CVT: Re0F10D

WARNING: This page is about a different variant/trim than selected.

DTC DETECTION LOGIC 

DTC

CONSULT screen terms

(Trouble diagnosis content)

DTC detection condition

P17F0

CVT JUDDER (T/M INSPECTION)

[CVT Judder (Transmission inspection)]

Diagnosis condition

--

Signal

--

Threshold

Malfunction in steel belt and pulley

Diagnosis delay time

--

POSSIBLE CAUSE 

Transmission assembly

FAIL-SAFE 

Not changed from normal driving

DTC Confirmation Procedure 

CAUTION: Always drive vehicle at a safe speed.
  1. PREPARATION BEFORE WORK 
    1. Customer reports "judder" (shake, shudder, single or multiple bumps or vibration).
    2. DTC P17F0 is stored.
    NOTE: Both of the above conditions must exist, otherwise repair is not authorized.

    Refer to applicable Technical Service Bulletin (TSB).

    Is "P17F0" detected?

    YES

    DTC Diagnosis Procedure 

    NO

    INSPECTION END