LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2019 >> Altima Edition ONE >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (Automatic Transmission (Re0F10D) (DTC/Circuit Diagnosis)) >> DTC Diagnosis >> Transmission (TCM) >> DTC P0894: Transmission Component Slipping >> DTC Description >> DTC Confirmation Procedure

DTC Confirmation Procedure

WARNING: This page is about a different variant/trim than selected.
CAUTION:
  • Diagnosis Procedure must be performed before starting "DTC CONFIRMATION PROCEDURE". Diagnosis Procedure 
  • Never perform "DTC CONFIRMATION PROCEDURE" before completing the repair, which may cause secondary malfunction.
  1. PRECONDITIONIG 

    If "DTC CONFIRMATION PROCEDURE" is previously conducted, always turn ignition switch OFF and wait at least 10 seconds before performing the next test.

    GO TO 2.

  2. CHECK DTC DETECTION 
    1. Start the engine.
    2. Drive the vehicle at constant vehicle speed on the flat load for 30 seconds or more.
    3. Check DTC

    Is "P0894" detected?

    YES

    Diagnosis Procedure 

    NO

    INSPECTION END

scientia non olet · About LEMON Manuals