DTC Detection Logic

DTC

CONSULT screen terms

(Trouble diagnosis content)

DTC detection condition

P0793

INTERMEDIATE SPEED SENSOR A

(Intermediate Shaft Speed Sensor "A" Circuit No Signal)

Diagnosis condition

When all of the following conditions are satisfied:

• TCM power supply voltage: More than 11 V
• After range change completion, it spends 2 seconds or more.

Signal

--

Threshold

When all of the following conditions are satisfied:

• 10-msec-ago primary pulley speed: 1, 000 rpm or more
• Now primary pulley speed: 0 rpm

Diagnosis delay time

0.5 seconds