DTC Detection Logic

WARNING: This page is about a different variant/trim than selected.

DTC	CONSULT screen terms (Trouble diagnosis content)	DTC detection condition
P0741	TORQUE CONVERTER (Torque converter clutch circuit performance or stuck off)	Diagnosis condition	When all of the following conditions are satisfied: TCM power supply voltage: More than 11 V P0717 is not detected. CAN communication is normal Torque converter slip speed: (40+vihicle speed/2) rpm
		Signal	--
		Threshold	LU pressure: More than 0.2 MPa
		Diagnosis delay time	Maintained for 30 seconds