DTC Detection Logic

DTC

CONSULT screen terms

(Trouble diagnosis content)

DTC detection condition

P0715

INPUT SPEED SENSOR A

(Input/Turbine Speed Sensor "A" Circuit No Signal)

Diagnosis condition

When all of the following conditions are satisfied:

• TCM power supply voltage: More than 11 V
• After range change completion, it spends 2 seconds or more.
• Range: Other than P, N
• P0791, P0792, and P0793 are not detected

Signal

--

Threshold

When all of the following conditions are satisfied:

• Primary pulley speed: 500 rpm or more
• Input speed: Less than 150 rpm

Diagnosis delay time

5 seconds