LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2019 >> Altima Edition ONE >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Engine Mechanical (Pr25DD) (2 Of 2)) >> Removal And Installation >> Engine Mounting Insulator (LH) >> ENGINE MOUNTING INSULATOR (LH) : Removal & Installation >> Removal

ENGINE MOUNTING INSULATOR (LH) : Removal & Installation: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the battery tray support. Refer to BATTERY TRAY : Removal & Installation .
  2. Remove the front under cover. Refer to FRONT UNDER COVER : Removal & Installation .
  3. Support the engine and transaxle using a suitable jack.
    CAUTION:
    • Do not damage oil pan (lower) or transaxle oil pan when supporting engine.
    • Place a piece of wood or equivalent as the supporting surface and secure in a stable condition.
  4. Remove the engine mounting insulator (LH).
scientia non olet · About LEMON Manuals