Inspection After Removal
WARNING: This page is about a different variant/trim than selected.
Outer Diameter of Cylinder Head Bolts
- Replace the cylinder heads bolts with new ones if the size difference between (A) and (B) exceeds the limit.
 Courtesy of NISSAN NORTH AMERICA, INC.
|
|
Limit [(A) - (B)]
|
: 0.23 mm (0.0091 in)
|
|
(C)
|
: 55 mm (2.17 in)
|
|
(D)
|
: 12 mm (0.47 in)
|
- If reduction of outer diameter appears in a position other than (B), use it as (B) point.