PR25DD engine: Installation
WARNING: This page is about a different variant/trim than selected.
Installation is in the reverse order of removal.
|
Standard type* |
DENSO |
|
DXE22H11C |
|
|
Gap (nominal) |
1.0 - 1.1 mm (0.039 - 0.043 in) |
*: Always check with the Parts Department for the latest parts information.
CAUTION:
Always tighten the spark plug to specified torque to align the orientation of electrodes. The ground electrode of a genuine spark plug is positioned in the area of maximum ignitability by tightening to the specified torque. When replacing spark plugs, use genuine spark plugs of which the ground electrode is adjusted.