WATER OUTLET : Removal & Installation: Installation

WARNING: This page is about a different variant/trim than selected.

Installation is in the reverse order of removal.

Install water outlet and tighten to the specified torque in the sequence shown.

Courtesy of NISSAN NORTH AMERICA, INC.

CAUTION: Do not reuse water outlet.

Water outlet bolts

: 22 N.m (2.2 kg-m, 16 ft-lb)

Install the engine coolant temperature sensor (if removed).
CAUTION: Do not reuse copper sealing washer.
After installation, refill engine coolant. Refer to ENGINE COOLANT : Refilling .