LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2019 >> Altima Edition ONE >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 13 (Engine Lubrication System (Pr25DD)) >> Removal And Installation >> Oil Cooler >> OIL COOLER : Inspection >> Inspection After Installation

Inspection After Installation

WARNING: This page is about a different variant/trim than selected.
  1. Check the engine oil level and add engine oil. Refer to Inspection .
  2. Check the engine coolant level and add and engine coolant. Refer to Inspection .
  3. Start the engine, and check that there is no leakage of engine oil or engine coolant.
  4. Stop the engine and wait for 10 minutes.
  5. Check the engine oil level again. Refer to Inspection .
  6. Check the engine coolant level again. Refer to Inspection .
scientia non olet · About LEMON Manuals