LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2019 >> Altima Edition ONE >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 13 (Engine Lubrication System (Pr25DD)) >> Removal And Installation >> Engine Oil Pressure Control Solenoid Valve >> ENGINE OIL PRESSURE CONTROL SOLENOID VALVE : Removal & Installation >> PR25DD engine >> Removal

PR25DD engine: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove oil pan (lower). Refer to Removal and Installation .
  2. Loosen bolts and remove the oil strainer.
    CAUTION: Do not reuse O-ring.
  3. Remove bolts (A) from engine oil pressure control solenoid valve.
    GNSALBIA2723Z-723Courtesy of NISSAN NORTH AMERICA, INC.
  4. Disconnect the harness connector from engine oil pressure control solenoid valve.
  5. Remove engine oil pressure control solenoid valve.
    CAUTION: Do not reuse O-rings.
scientia non olet · About LEMON Manuals