LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2019 >> Altima Edition ONE >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Automatic Transmission (Re0F10D) (2 Of 2)) >> Removal And Installation >> Fluid Cooler System >> FLUID COOLER SYSTEM : Removal & Installation >> PR25DD engine >> Removal

PR25DD engine: Removal

WARNING: This page is about a different variant/trim than selected.
NOTE: When removing components such as hoses, tubes/lines, etc., cap or plug openings to prevent fluid from spilling.
  1. Drain engine coolant. Refer to Draining .
  2. Remove the air cleaner and air duct assembly. Refer to Removal and Installation .
  3. Remove the CVT fluid cooler hose A and the CVT fluid cooler hose B from the radiator.
  4. Remove the CVT fluid cooler hose A and the CVT fluid cooler hose B from the CVT oil warmer.
scientia non olet · About LEMON Manuals