DTC Confirmation Procedure

1. Start engine and drive the vehicle as per the similar conditions to Freeze Frame Data for 5 seconds. Refer to the table below.
2. Hold the accelerator pedal as steady as possible.
   CAUTION: Always drive vehicle in safe manner according to traffic conditions and obey all traffic laws when driving.
   • COOLANT TEMP
   • ENGINE SPEED
   • CAL/LD VALUE

Is DTC detected?

YES

Proceed to DTC Diagnosis Procedure .

NO

To check malfunction symptom before repair: Refer to Intermittent Incident .

NO

Confirmation after repair: INSPECTION END