PR25DD engine
WARNING: This page is about a different variant/trim than selected.
- CHECK DTC PRIORITY
If DTC P2619 is displayed with DTC P0335 or P0643, first perform the confirmation procedure (trouble diagnosis) for DTC P0335 or P0643.
Is DTC P0335 or P0643 detected?
YES
Perform diagnosis of applicable.
- DTC P0335: DTC Description
- DTC P0643: DTC Description
NO
GO TO 2.
- CHECK CRANKSHAFT POSITION (CKP) SENSOR SIGNAL CIRCUIT FOR ELECTRIC INTAKE VALVE TIMING CONTROL
- Turn ignition switch OFF.
- Disconnect ECM harness connector and electric intake valve timing control module harness connector.
- Check the continuity between ECM harness connector and electric intake valve timing control module harness connector.
ECM
Electric intake valve timing control module
Continuity
Connector
Terminal
Connector
Terminal
F91
22
F92
28
Existed
- Also check harness for short to power and short to ground.
Is the inspection result normal?
YES
INSPECTION END
NO
Repair or replace error-detected parts.