DTC Detection Logic
WARNING: This page is about a different variant/trim than selected.
|
DTC |
CONSULT screen terms (Trouble diagnosis content) |
DTC detection condition |
|||
|
P2614 |
00 |
A camshaft posi signal B1 (Camshaft A Position Signal Output Circuit/Open Bank 1) |
A |
Diagnosis condition |
Engine running at idle |
|
Signal (terminal) |
Intake camshaft position sensor signal for electric intake valve timing control |
||||
|
Threshold |
The signal voltage of intake camshaft position sensor is less than 1.0 V |
||||
|
Diagnosis delay time |
1 second |
||||
|
B |
Diagnosis condition |
Engine running at idle |
|||
|
Signal (terminal) |
Intake camshaft position sensor signal for electric intake valve timing control |
||||
|
Threshold |
The signal voltage of intake camshaft position sensor is more than 5.8 V |
||||
|
Diagnosis delay time |
1 second |
||||