PR25DD engine

1. Turn ignition switch OFF.
2. Disconnect engine oil temperature sensor harness connector.
3. Remove engine oil temperature sensor.
4. Check resistance between engine oil temperature sensor terminals by heating with hot water as shown in the figure.

   Courtesy of NISSAN NORTH AMERICA, INC.

   Engine oil temperature sensor		Condition		Resistance (kOhm)
   +	-
   Terminal
   1	2	Temperature [ deg. C (deg. F)]	20 (68)	2.37 - 2.63
   			50 (122)	0.68 - 1.00
   			90 (194)	0.236 - 0.260

Is the inspection result normal?

YES

INSPECTION END

NO

Replace engine oil temperature sensor. Refer to Component Location .