LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2019 >> Altima Edition ONE >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Engine Control System (DTC/Circuit Diagnosis) (Pr25DD) (3 Of 4)) >> DTC/Circuit Diagnosis >> P1A10 ECM Initial Learning Incomplete >> DTC Diagnosis Procedure >> PR25DD engine

PR25DD engine

WARNING: This page is about a different variant/trim than selected.
  1. PERFORM ECM INITIAL LEARNING 
    1. Turn ignition switch ON. (Do not start the engine.)
    2. Set selector lever to P position and apply parking brake.
    3. Accelerator pedal is fully depressed and erase DTC.
    4. Turn ignition switch OFF.
    5. Check that no DTC is detected.

    INSPECTION END

scientia non olet · About LEMON Manuals