DTC Detection Logic
WARNING: This page is about a different variant/trim than selected.
If the cooling fan or another component in the cooling system malfunctions, engine coolant temperature will rise.
When the engine coolant temperature reaches an abnormally high temperature condition, a malfunction is indicated.
|
DTC |
CONSULT screen terms (Trouble diagnosis content) |
DTC detection condition |
||
|
P1217 |
00 |
OVER TEMP [OVER HEAT] |
Diagnosis condition |
-- |
|
Signal (terminal) |
-- |
|||
|
Threshold |
Engine coolant temperature reaches an abnormally high temperature |
|||
|
Diagnosis delay time |
-- |
|||
CAUTION:
When a malfunction is indicated, be sure to replace the coolant. Also, replace the engine oil.
- Fill radiator with coolant up to specified level with a filling speed of 2 liters per minute. Be sure to use coolant with the proper mixture ratio.
- After refilling coolant, run engine to ensure that no water-flow noise is emitted.