LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2019 >> Altima Edition ONE >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 10 (Engine Control System (DTC/Circuit Diagnosis) (Pr25DD) (3 Of 4)) >> DTC/Circuit Diagnosis >> P10C0 Internal Control Module Fuel Injector >> DTC Description >> PR25DD engine >> Fail-Safe

PR25DD engine: Fail-Safe

WARNING: This page is about a different variant/trim than selected.

Engine operating condition in fail-safe mode

Fail safe mode

Vehicle behavior

Traveling control mode

Accelerator angle variation control

ECM controls the accelerator pedal depression speed to make it slower than actual speed. This causes a drop in accelerating performance and encourages the driver to repair malfunction.

NOTE: ECM does not control the accelerator pedal releasing speed.

Device fix mode
  • This mode fixes the electric IVT motor and the EVT control solenoid valve in the reference position.
  • The intake manifold runner control valve motor is turned OFF (intake manifold runner control valve opens).
  • A control signals is not transmitted to EGR volume control valve and the EGR volume control is deactivated.

Combustion control mode

Stratified charge combustion control at starting

No stratified charge combustion at starting (cold start).
scientia non olet · About LEMON Manuals