Component Description

WARNING: This page is about a different variant/trim than selected.

No.	Component	Function
1.	Shift lock release button cover	Remove this cover to access the shift lock release button located on the CVT shift selector assembly.
2.	Shift lock release button	Manually releases the shift lock system when pressed.
3.	Park position switch (shift selector)	This switch closes to provide ground to the solenoid
4.	Park position switch	Detects that the CVT shift selector is in the "P" position
5.	Shift lock solenoid	Operates according to the signal from the stop lamp switch and engages/disengages the shift lock lever
6.	Shift lock relay	Prevents energizing of the shift lock solenoid regardless of brake pedal position during a remote engine start event.
7.	Stop lamp switch	The stop lamp switch turns on when the brake pedal is pressed. When the stop lamp switch turns on, the shift lock solenoid is energized
8.	Fuse block (J/B)	Contains fuses for the stop lamp switch and BCM.
9.	BCM	Monitors stop lamp switch and park position switch operation. Controls the shift lock relay according to vehicle status when equipped with remote engine start.