Work Procedure

WARNING: This page is about a different variant/trim than selected.

Shift the shift selector to the "P" position.
CAUTION: Turn wheels at least a quarter turn and be certain the park position mechanism is fully enga deg.
Loosen the control cable nut (A) and set manual lever (B) to the "P" position.
CAUTION: Do not apply force to the manual lever.

Courtesy of NISSAN NORTH AMERICA, INC.

Courtesy of NISSAN NORTH AMERICA, INC.
Tighten the control cable nut to specified torque. Refer to CONTROL CABLE : Exploded View .
CAUTION: Hold manual lever securely in the "P" position when tightening control cable nut (A).