BATTERY DISCONNECT : Removal & Installation: Installation
Installation is in the reverse order of removal.
CAUTION:
Replace the fusible link box (battery) if it has been dropped or sustained an impact.
To install the battery or batteries, carefully read the following instructions:
- To prevent damage to the parts, connect the battery or batteries cable to the positive terminal first.
- After connecting battery cables, to securely supply battery voltage, ensure battery cables are tightly clamped to battery terminals for good contact.
- To securely supply battery voltage, check battery terminals for poor connection caused by corrosion.
|
Battery positive terminal nut |
: 5.39 N.m (0.55 kg-m, 47.5 in-lb) |
|
Battery negative terminal nut |
: 5.39 N.m (0.55 kg-m, 47.5 in-lb) |
Perform "ADDITIONAL SERVICE WHEN REMOVING 12V BATTERY NEGATIVE TERMINAL". Refer to After Work Procedure .