LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2019 >> Altima Edition ONE >> Repair and Diagnosis >> Electrical >> Motors, Switches, Relays >> Power Supply, Ground & Circuit Elements >> Removal And Installation >> 12V Battery >> 12V BATTERY : Removal & Installation >> Installation

12V BATTERY : Removal & Installation: Installation

Installation is in the reverse order of removal.

CAUTION:
  • To prevent damage to the parts, connect the battery cable to the positive terminal first.
  • After connecting battery cables, to securely supply battery voltage, ensure that they are tightly clamped to battery terminals for good contact.
  • To securely supply battery voltage, check battery terminal for poor connection caused by corrosion.

Perform "ADDITIONAL SERVICE WHEN REMOVING 12V BATTERY NEGATIVE TERMINAL". Refer to After Work Procedure .

scientia non olet · About LEMON Manuals