LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2019 >> Altima Edition ONE >> Repair and Diagnosis >> Electrical >> Motors, Switches, Relays >> Power Supply, Ground & Circuit Elements >> Basic Inspection >> Power Supply, Ground Circuit Elements >> 12V Battery Inspection >> Work Procedure >> How To Handle Battery

How To Handle Battery

CAUTION:
  • If it becomes necessary to start the engine with a booster battery and jumper cables, use a 12-volt booster battery.
  • After connecting battery cables, ensure that they are tightly clamped to battery terminals for good contact.
  • Never add distilled water through the battery gas vents.
  • Never remove the battery vent barrel.