Combination Meter: Fail-safe

The combination meter activates the fail-safe control if CAN communication with each unit is malfunctioning.

Function			Specifications
Speedometer			Reset to zero by suspending communication.
Tachometer
Engine coolant temperature gauge			When reception time of an abnormal signal is 60 seconds or less, the last value received. When reception time of an abnormal signal is more than 60 seconds, reset to zero.
Illumination control			When suspending communication, changes to nighttime mode.
Information display	Odo/trip meter		An indicated value is maintained at communications blackout.
	Trip computer	Current fuel consumption	The last result calculated during normal condition is indicated.
		Average fuel consumption
		Average vehicle speed
		Distance to empty
		Stop/Start system information
	ECO pedal guide		The display turns OFF by suspending communication.
Buzzer			The buzzer turns OFF by suspending communication.
Warning lamp/indicator lamp	ABS warning lamp		The lamp turns ON by suspending communication.
	VDC warning lamp
	Brake warning lamp
	AEB warning lamp
	Power steering warning lamp
	SRS air bag warning lamp
	Malfunction indicator lamp (MIL)
	Low tire pressure warning lamp		When reception time of an abnormal signal is 60 seconds or less, the lamp blinking. When reception time of an abnormal signal is more than 60 seconds, the lamp turns ON.
	High beam indicator lamp		The lamp turns OFF by suspending communication.
	VDC OFF indicator lamp
	Turn signal indicator lamp
	Front fog lamp indicator lamp
	Position lamp indicator lamp
	12V battery charge warning lamp
	Seat belt warning lamp
	Engine oil pressure warning lamp