Consult Data Monitor Standard Value
|
Monitor item |
Condition |
Reference values in normal operation |
|
ACTUATOR VOLT (RH) |
Ignition switch ON |
Battery voltage |
|
ACTUATOR VOLT (LH) |
Ignition switch ON |
Battery voltage |
|
ACTUATOR CURRENT (RH) |
Ignition switch ON (motor is stop: apply or release) |
Approx. 0 A |
|
Ignition switch ON (motor is active: apply) |
12 - 20 A |
|
|
Ignition switch ON (motor is active: release) |
1 - 12 A |
|
|
ACTUATOR CURRENT (LH) |
Ignition switch ON (motor is stop: apply or release) |
Approx. 0 A |
|
Ignition switch ON (motor is active: apply) |
12 - 20 A |
|
|
Ignition switch ON (motor is active: release) |
1 - 12 A |
|
|
POWER SUPPLY VOLTAGE |
Ignition switch On |
Battery voltage |
|
ACTUATOR POWER SUP (RH) |
Ignition switch On |
Not High |
|
ACTUATOR POWER SUP (LH) |
Ignition switch On |
Not High |
|
PB SW |
Electric parking brake switch is pulled |
PULL |
|
Electric parking brake switch is not operated |
N |
|
|
Electric parking brake switch is pushed |
PUSH |
|
|
Electric parking brake switch is malfunctioning |
MALF |
|
|
BRAKE STATUS (LH) |
Displayed but not used |
ACT 1 |
|
Piston of the rear brake caliper assembly (LH side) is pushed out [when the parking brake actuator (LH side) operation is activated] |
ACT 2 |
|
|
Push-out of the piston of the rear brake caliper assembly (LH side) is complete [when the parking brake actuator (LH side) operation activation is completed] |
ACT 3 |
|
|
Piston of the rear brake caliper assembly (LH side) is pulled back [when the parking brake actuator (LH side) release is completed] |
RLS 1 |
|
|
Piston of the rear brake caliper assembly (LH side) is pulled back [when the parking brake actuator (LH side) release is activated] |
RLS 2 |
|
|
Piston position of the rear brake caliper assembly (LH side) is unclear [when the parking brake actuator (LH side) activation is unclear] |
UNKNO |
|
|
Piston of the rear brake caliper assembly (LH side) is at the initial position [when the parking brake actuator (LH side) is in the initial position status] |
INIT |
|
|
Pull-back of the piston of the rear brake caliper assembly (LH side) is complete [when driving of the parking brake actuator (LH side) release activation is complete] |
RLS 3 |
|
|
Piston of the rear brake caliper assembly (LH side) is pulled back [when the parking brake actuator (LH side) release for replace of rear brake pad is activated] |
RLS 4 |
|
|
BRAKE STATUS (RH) |
Displayed but not used |
ACT 1 |
|
Piston of the rear brake caliper assembly (RH side) is pushed out [when the parking brake actuator (RH side) operation is activated] |
ACT 2 |
|
|
Push-out of the piston of the rear brake caliper assembly (RH side) is complete [when the parking brake actuator (RH side) operation activation is completed] |
ACT 3 |
|
|
Piston of the rear brake caliper assembly (RH side) is pulled back [when the parking brake actuator (RH side) release is completed] |
RLS 1 |
|
|
Piston of the rear brake caliper assembly (RH side) is pulled back [when the parking brake actuator (RH side) release is activated] |
RLS 2 |
|
|
Piston position of the rear brake caliper assembly (RH side) is unclear [when the parking brake actuator (RH side) activation is unclear] |
UNKNO |
|
|
Piston of the rear brake caliper assembly (RH side) is at the initial position [when the parking brake actuator (RH side) is in the initial position status] |
INIT |
|
|
Pull-back of the piston of the rear brake caliper assembly (RH side) is complete [when driving of the parking brake actuator (RH side) release activation is complete] |
RLS 3 |
|
|
Piston of the rear brake caliper assembly (RH side) is pulled back [when the parking brake actuator (RH side) release for replace of rear brake pad is activated] |
RLS 4 |
|
|
PB SW OPERATION COUNT 1 |
Ignition switch On |
Changes according to the number of times Electric parking brake switch is operated. |
|
PB SW OPERATION COUNT 2 |
Ignition switch On |
Changes according to the number of times Electric parking brake switch is operated. |
|
PB ACT COUNTER (LH) |
Always |
Changes according to the number of times Electric parking brake system is operated. |
|
PB ACT COUNTER (RH) |
Always |
Changes according to the number of times Electric parking brake system is operated. |
|
VEHICLE STATUS |
No warning |
NOT |
|
Vehicle is move backward |
WARN |
|
|
PB SW INDICATOR * |
Parking switch indicator lamp is OFF |
Off |
|
Parking switch indicator lamp is ON |
On |
|
|
Parking switch indicator lamp is blinking |
BLINK |
*: Refer to System Description for ON/OFF/BRINK conditions of each warning lamp and each indicator lamp, buzzer and information display in the combination meter.