Data Monitor

NOTE: The following table includes information (items) inapplicable to this vehicle. For information (items) applicable to this vehicle, refer to CONSULT display items.

Item [Indication/Unit]		Description
ACTUATOR VOLT (RH)	[V]	Displays the voltage value applied to the parking brake actuator (RH side).
ACTUATOR VOLT (LH)	[V]	Displays the voltage value applied to the parking brake actuator (LH side).
ACTUATOR CURRENT (RH)	[A]	Displays the current value applied to the parking brake actuator (RH side).
ACTUATOR CURRENT (LH)	[A]	Displays the current value applied to the parking brake actuator (LH side).
POWER SUPPLY VOLTAGE	[V]	Displays the power supply voltage.
ACTUATOR POWER SUP (RH)	[High or not high]	Displays the voltage output to the actuator (RH).
ACTUATOR POWER SUP (LH))	[High or not high]	Displays the voltage output to the actuator (LH).
PB SW	[PULL/N/PUSH/MALF]	Displays the electric parking brake switch status.
BRAKE STATUS (LH)	[ACT 1/ACT 2/ACT 3/RLS 1/RLS 2/UNKNO/INIT/RLS 3/RLS 4]	Displays the piston status of the rear brake caliper assembly (LH side) [parking brake actuator (LH side) driving status].
BRAKE STATUS (RH)	[ACT 1/ACT 2/ACT 3/RLS 1/RLS 2/UNKNO/INIT/RLS 3/RLS 4]	Displays the piston status of the rear brake caliper assembly (RH side) [parking brake actuator (LH side) driving status].
PB SW OPERATION COUNT 1	Displays the number of operations of the electric parking brake system switch (Count 1).
PB SW OPERATION COUNT 2	Displays the number of operations of the electric parking brake system switch (Count 2).
PB ACT COUNTER (LH)	Displays the number of operations of the electric parking brake system (LH side).
PB ACT COUNTER (RH)	Displays the number of operations of the electric parking brake system (RH side).
PB SW INDICATOR ^*	[Off/On/BLINK]	Displays the status of electric parking brake switch indicator.

*: Refer to System Description for ON/OFF/BRINK conditions of each warning lamp and each indicator lamp, buzzer and information display in the combination meter.