Component Inspection
- CHECK ELECTRIC PARKING BRAKE SWITCH
- Ignition switch OFF.
- Disconnect the electric parking brake switch harness connector.
- Check the continuity when electric parking brake switch is operated.
Condition
Terminal
Continuity
When electric parking brake switch is neutral
3 - 5
Yes
6 - 7
Yes
When electric parking brake switch is pull
3 - 5
Yes
5 - 7
Yes
When electric parking brake switch is push
3 - 6
Yes
6 - 7
Yes
Is the inspection result normal?
YES
Inspection End.
NO
Replace the electric parking brake switch. Refer to ELECTRIC PARKING BRAKE SWITCH : Removal & Installation .