Diagnosis Procedure

The front fog lamps do not turn ON in any setting.

1. COMBINATION SWITCH (LIGHTING AND TURN SIGNAL SWITCH) INSPECTION 

   Check the combination switch (lighting and turn signal switch). Refer to Symptom Table

   Is the combination switch (lighting and turn signal switch) normal?

   YES

   GO TO 2.

   NO

   Repair or replace the malfunctioning part.

2. CHECK FRONT FOG LAMP REQUEST SIGNAL INPUT 

   CONSULT

   1. Select "FR FOG REQ" in "Data Monitor" mode of "IPDM E/R".
   2. With operating the front fog lamp switch, check the monitor status.

   Monitor item	Condition		Monitor status
   FR FOG REQ	Front fog lamp switch (Lighting switch 2nd)	ON	ON
   		OFF	OFF

   Is the monitor item status normal?

   YES

   GO TO 3.

   NO

   Replace BCM. Refer to BCM : Removal & Installation .

3. FRONT FOG LAMP CIRCUIT INSPECTION 

   Check the front fog lamp circuit. Refer to Component Function Check .

   Is the front fog lamp circuit normal?

   YES

   Replace IPDM E/R. Refer to IPDM E/R : Removal & Installation .

   NO

   Repair or replace the malfunctioning part.