Component Inspection

1. Ignition switch OFF.
2. Disconnect ambient sensor connector.
3. Check resistance between ambient sensor terminals.

   Terminal		Condition	Resistance: kOhm
   		Temperature: deg.C (deg.F)
   1	2	10 (50)	4.00
   		15 (59)	3.25
   		20 (68)	2.65
   		25 (77)	2.19
   		30 (86)	1.81
   		35 (95)	1.51
   		40 (104)	1.27
   		45 (113)	1.15

Is the inspection result normal?

YES

Inspection End.

NO

Replace ambient sensor. Refer to AMBIENT SENSOR : Removal & Installation .