Diagnosis Procedure

1. Ignition switch OFF.
2. Disconnect IPDM E/R connector, license plate lamp LH and license plate lamp RH connector.
3. Check continuity between IPDM E/R harness connector, license plate lamp LH harness connector and license plate lamp RH harness connector.

   IPDM E/R		License plate lamp		Continuity
   Connector	Terminal	Connector	Terminal
   E17	17	B34	1	Yes
   		B32

Is the inspection result normal?

YES

GO TO 2.

NO

Repair or replace harness.

Check continuity between license plate lamp connector and ground.

Is the inspection result normal?

YES

Replace license plate lamp. Refer to Removal and Installation .

NO

Repair or replace harness.