Component Inspection

REMOVE FUEL LEVEL SENSOR UNIT
Remove The Fuel Level Sensor Unit And Fuel Pump (Fuel Level Sensor). Refer To REMOVAL AND INSTALLATION .

GO TO 2.

CHECK FUEL LEVEL SENSOR UNIT

Check The Resistance Between Fuel Level Sensor Unit And Fuel Pump (Fuel Level Sensor) Terminals.

Courtesy of NISSAN NORTH AMERICA, INC.

Terminals		Condition	Resistance (Ω) (Approx.)	Height [mm (in)]
Fuel Level Sensor Unit And Fuel Pump (Fuel Level Sensor)
2	5	Full ^* (2)	51	151 (5.9)
		Empty ^* (1)	278	13.8 (0.5)

*: When Float Rod Is In Contact With Stopper.

Is Inspection Result OK?

YES

Inspection End.

Replace Fuel Level Sensor Unit And Fuel Pump (Fuel Level Sensor). Refer To REMOVAL AND INSTALLATION .