Diagnostic Test
- PERFORM SELF DIAGNOSTIC RESULT
With CONSULT
- Turn the ignition switch ON.
- Select "Self Diagnostic Result" of "AIR PRESSURE MONITOR".
- Check DTC.
Are any DTCs detected?
YES
Refer to DTC INDEX .
NO
GO TO STEP 2.
- CHECK LOW TIRE PRESSURE WARNING LAMP SIGNAL
With CONSULT
- Turn the ignition switch ON.
- Select "Active Test" mode in "AIR PRESSURE MONITOR".
- Select "WARNING LAMP" and turn ON the low tire pressure warning lamp.
Is the inspection result normal?
YES
Check the combination meter. Refer to CONSULT FUNCTION (METER/M&A) .
NO
Replace the BCM. Refer to REMOVAL AND INSTALLATION (with Intelligent Key system) or REMOVAL AND INSTALLATION (without Intelligent Key system).