Diagnosis Procedure

NOTE:

The Signal Tech II Tool [- (J-50190)] can be used to perform the following functions. Refer to the Signal Tech II User Guide for additional information.

Activate and display TPMS sensor IDs
Display tire pressure reported by the TPMS sensor
Read TPMS DTCs
Register TPMS sensor IDs

PERFORM SELF DIAGNOSTIC RESULT FOR ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT)

With CONSULT

Perform "Self Diagnostic Result" for "ABS". Refer to CONSULT FUNCTION .

Are any DTCs detected?

YES

Refer to DTC INDEX .

NO

Replace the BCM. Refer to REMOVAL AND INSTALLATION (with Intelligent Key system) or REMOVAL AND INSTALLATION (without Intelligent Key system).