LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2017 >> Rogue S, AWD >> Repair and Diagnosis >> Suspension >> Wheels & Tire System >> Tires, Wheels & Tire Pressure Monitoring System (TPMS) (DTC/Circuit Diagnosis) (Except Hybrid) >> DTC/Circuit Diagnosis >> DTC C1716, C1717, C1718, C1719: Transmitter (Pressure Data) >> DTC Logic >> DTC Confirmation Procedure

DTC Confirmation Procedure

  1. PERFORM SELF DIAGNOSTIC RESULT

    G-20With CONSULT 

    1. Check tire pressure for all wheels and adjust to the specified value. Refer to TIRE AIR PRESSURE .
    2. Drive at a speed of 40 km/h (25 MPH) or more for 3 minutes, and then drive the vehicle at any speed for 10 minutes.
    3. Select "Self Diagnostic Result" mode of "AIR PRESSURE MONITOR".
    4. Check DTC.

    Is DTC C1716, C1717, C1718, or C1719 detected?

    YES 

    Proceed to DIAGNOSIS PROCEDURE .

    NO 

    Inspection End.