How To Read Harness Layout

The following Harness Layouts use a map style grid to help locate connectors on the drawings:

Courtesy of NISSAN NORTH AMERICA, INC.

• Body Harness, Motion Activated Back Door Sub-harness, and Chassis Harness
• Body No. 2 Harness
• Engine Room Harness
• Engine Room Harness (Passenger Compartment)
• Front End Module Harness
• Engine Control Harness
• Main Harness and Main Sub-harness
• Room Lamp Harness

To use the grid reference 

1. Find the desired connector number on the connector list.
2. Find the grid reference.
3. On the drawing, find the crossing of the grid reference letter column and number row.
4. Find the connector number in the crossing zone.
5. Follow the line (if used) to the connector.