LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2017 >> Rogue S, AWD >> Repair and Diagnosis >> Electrical >> Gauges >> Meter, Warning Lamp & Indicator (DTC/Circuit Diagnosis) (Except Hybrid) >> DTC/Circuit Diagnosis >> Steering Switch >> Component Inspection

Component Inspection

  1. CHECK STEERING SWITCH RESISTANCE

    Check resistance between the following steering switch terminals:

    Steering switches Condition Resistance (Ω)
    (Approx.)
    Terminals
    19 25 Depress RTRI switch. 2126
    Depress LTRI switch. 654
    Depress OK switch. 264
    Depress UTRI switch. 52
    Depress DTRI switch. 134
    Depress BACK_R switch. 1

    Is the inspection result normal?

    YES 

    GO TO STEP 2  .

    NO 

    Replace steering switches. Refer to REMOVAL AND INSTALLATION .

  2. CHECK SPIRAL CABLE

    Check continuity between the following spiral cable terminals:

    Spiral cable Continuity
    Terminals
    18 15 Yes
    25 8
    19 14

    Is the inspection result normal?

    YES 

    Inspection End.

    NO 

    Replace spiral cable. Refer to REMOVAL AND INSTALLATION .