Diagnosis Procedure

Regarding Wiring Diagram information, refer to WIRING DIAGRAM .

1. CHECK PARKING BRAKE SWITCH CIRCUIT
   
   
   1. Disconnect combination meter harness connector M76 and parking brake switch harness connector E52.
   2. Check continuity between combination meter harness connector M76 terminal 26 and parking brake switch harness connector E52 terminal 1.

      Combination meter		Parking brake switch		Continuity
      Connector	Terminal	Connector	Terminal
      M76	26	E52	1	Yes

   3. Check continuity between combination meter harness connector M76 terminal 26 and ground.

      Combination meter		Ground	Continuity
      Connector	Terminal
      M76	26		No

   Is the inspection result normal?

   YES 

   Inspection End.

   NO 

   Repair or replace harness or connector.