Component Inspection
- CHECK DOOR MIRROR MOTOR-I
Check that door mirror motor does not trap foreign objects and does not have any damage.
Refer to EXPLODED VIEW WITH TORQUE SPECIFICATIONS .
Is the inspection result normal?
YES
GO TO STEP 2 .
NO
Replace door mirror actuator. Refer to REMOVAL AND INSTALLATION .
- CHECK DOOR MIRROR MOTOR-II
- Turn ignition switch OFF.
- Disconnect door mirror.
- Apply 12V to each power supply terminal of door mirror motor.
Door mirror connector Terminal Operational direction (+) (-) D16 (LH)
D106 (RH)4 5 RIGHT 5 4 LEFT 12 11 UP 11 12 DOWN
Is the inspection result normal?
YES
Inspection End.
NO
Replace door mirror actuator. Refer to INTERMITTENT INCIDENT .