LEMON Manuals: Even more car manuals for everyone
Home >> Nissan-Datsun >> 2017 >> Rogue S, AWD >> Repair and Diagnosis >> Body & Frame >> Seats >> Automatic Drive Positioner (DTC/Circuit Diagnosis) (Except Hybrid) >> DTC/Circuit Diagnosis >> DTC B2130: EEPROM >> Diagnosis Procedure

Diagnosis Procedure

  1. PERFORM DTC CONFIRMATION PROCEDURE

    G-20 CONSULT

    1. Turn ignition switch ON.
    2. Check "Self Diagnostic Result" mode of "AUTO DRIVE POS.".
    3. Erase the DTC.
    4. Perform DTC confirmation procedure. Refer to DTC LOGIC .

    Is the DTC displayed again?

    YES 

    Replace driver seat control unit. Refer to REMOVAL AND INSTALLATION .

    NO 

    GO TO STEP 2  .

  2. CHECK INTERMITTENT INCIDENT

    Refer to INTERMITTENT INCIDENT .

    Inspection End.