Diagnosis Procedure
- PERFORM THE SELF-DIAGNOSIS
- Turn the ignition switch ON.
- Turn the FEB or LDW system ON.
- Perform "All DTC Reading" with CONSULT.
- Check if "U1000-01" is detected as the current malfunction in "Self Diagnostic Result" of "LANE CAMERA".
Is "U1000-01" detected as the current malfunction?
YES
Refer to TROUBLE DIAGNOSIS FLOW CHART .
NO - 1
To check malfunction symptom before repair: Refer to INTERMITTENT INCIDENT .
NO - 2
Confirmation after repair: Inspection End.