Component Function Check

CHECK FUNCTION

CONSULT

Select "Data Monitor" mode of "AUTO DRIVE POS.".
Select "MIR/SEN RH U-D", "MIR/SEN RH R-L".

Check that the function operates normally according to the following conditions:

Monitor item	Condition		Value
MIR/SEN RH U-D	Door mirror RH	Close to peak	3.4 V
MIR/SEN RH U-D		Close to valley	0.6 V
MIR/SEN RH R-L		Close to right edge	3.4 V
MIR/SEN RH R-L		Close to left edge	0.6 V

Is the inspection result normal?

YES

Inspection End.

NO

Perform diagnosis procedure. Refer to DIAGNOSIS PROCEDURE .